Visit us at INNOTRANS 2024 in Hall 23A, Booth 950 from September 24th to September 27th, 2024.

Systems for Measuring Corner Force on Coach Bodies

The ELAS system is a high-precision measuring solution for determining and adjusting low-torsion positions of coach bodies and includes various types that can be flexibly adapted to different installation situations and vehicle types. It is used in many phases of vehicle construction, from bodywork to final assembly, as well as in retrofitting, repairs, and condition analysis of vehicles involved in accidents. It complies with the requirements of DIN 25043.

Depending on the installation situation, we offer the right system for measuring corner force.

At WINtec process GmbH, we provide solutions with our ELAS designs for your measurement processes in the field of corner force determination. We are happy to advise you on which system best suits your application.

ELAS-m in Action

The WINtec process Prinziple

We have developed a clearly structured process to ensure that your project is in the best hands right from the start. This ensures that we record your requirements precisely and implement them with the best possible solution. Find out how we achieve the best result together in just a few steps.

STEP 1

Clarification of the Task and Technical Details

Our measuring systems are designed to meet the highest technical standards. In addition to reliability and robustness, our designs are extremely precise and user-friendly. We are happy to advise you on your application and provide you with the appropriate concept solution.

STEP 2
Mobile Messeinrichtung zur Ermittlung von Eckkräften Typ ELAS-m - Einbausituation und Produktion

Installation Conditions and Production

Together, we will assess your installation situation. After that, production of your measuring system can begin. This ensures precise measurement results, regardless of the specific conditions on site.

STEP 3

On-Site Service and Training

We support the initial commissioning on site and train your staff in the use of the measuring equipment.

StARK-s

StARK-c

Mobiles Radaufstandskraftmesssystem

The ELAS-m corner force measuring system is a low-cost alternative to the automatic ELAS-a system. This transportable four-point measuring system can easily be integrated in jack systems and has a precision lift facility.

    I am the caption

    I am the caption

    1 / 4

    2 / 4

Auf einem Blick:

  • mobil einsetzbares hochgenaues Messsystem zur Ermittlung der Radaufstandskraft entsprechend DIN EN 15654, DIN 27201, DIN EN 50215, EN 14363 und UIC V660
  • äußerst flexibel einsetzbares Messsystem, da jederzeit schnell anpassbar an unterschiedliche Einbauorte, sowie Achs- und Drehgestellmittenabstände
  • Beilagenbleche zu Herstellung einer eigenen Höhenreferenz (Messgleisqualität)  
  • Messung erfolgt auf der Spurkranzkuppe, wodurch keine Querkräfte, die das Messergebnis beeinflussen können, auftreten 
  • Keine Beeinflussung der Messwerte durch Querversatz der Räder

The ELAS-m mobile corner force measuring unit was developed in response to market demands for lower-cost alternatives to automatic stress test rigs.

The compact design of the system makes it suitable for mobile use on jacks at different locations. This provides a high degree of certitude for those with responsibility for planning and budget.

The integrated precision lift facility allows exact positioning in respect of heights and forces. The special design of the measuring points guarantees that heights will be sustained and forces held, even for relatively long periods of time. This prolonged height hold is essential if a geometric measurement of the profile of the coach body is required after the position or reference position of low torsional stress has been reached.

Read more

Auf einem Blick:

  • mobil einsetzbares hochgenaues Messsystem zur Ermittlung der Radaufstandskraft entsprechend DIN EN 15654, DIN 27201, DIN EN 50215, EN 14363 und UIC V660
  • äußerst flexibel einsetzbares Messsystem, da jederzeit schnell anpassbar an unterschiedliche Einbauorte, sowie Achs- und Drehgestellmittenabstände
  • Beilagenbleche zu Herstellung einer eigenen Höhenreferenz (Messgleisqualität)  
  • Messung erfolgt auf der Spurkranzkuppe, wodurch keine Querkräfte, die das Messergebnis beeinflussen können, auftreten 
  • Keine Beeinflussung der Messwerte durch Querversatz der Räder

The ELAS-m mobile corner force measuring unit was developed in response to market demands for lower-cost alternatives to automatic stress test rigs.

The compact design of the system makes it suitable for mobile use on jacks at different locations. This provides a high degree of certitude for those with responsibility for planning and budget.

The integrated precision lift facility allows exact positioning in respect of heights and forces. The special design of the measuring points guarantees that heights will be sustained and forces held, even for relatively long periods of time. This prolonged height hold is essential if a geometric measurement of the profile of the coach body is required after the position or reference position of low torsional stress has been reached.

Read more

Product Selection

Mobile Corner Force Measuring System for Determining the Low-Torsion Position and Reference Position of Coach Bodies

At a Glance:

Setup within minutes and easy to operate

Patented system for compensating blind forces from the coach body, ensuring high accuracy and reproducibility of measurement results

Software-assisted adjustment of low torsional stress position

Setting the low torsional stress reference position for coach bodies

Complies with DIN 25043 (reference force method)

The mobile ELAS system offers a cost-effective alternative to the automatic stationary ELAS-a system and is distinguished by its mobility and flexible usability.

It is used in various areas, including bodywork, final assembly, as well as retrofitting and repairs. Additionally, it is employed for condition analysis of vehicles involved in accidents. The system complies with the requirements of DIN 25043 and allows for the calculation of the center of gravity, required shim thicknesses, and the total weight of a vehicle.

In Detail:

  • Complies with DIN 25043 (reference force measurement)  
  • Calculation of the center of gravity and total mass of coach bodies and locomotives, as well as the required shim thickness  
  • Software-assisted adjustment of the low-torsion position  
  • Setting of the low-torsion reference position  
  • Ability to maintain the achieved position over a longer period, e.g., during subsequent geometric measurements  
  • Cost-effective alternative to automatic corner force measuring systems  
  • Setup within minutes, no special tools required  
  • Easy to operate  
  • Compact dimensions, allowing for flexible use in different installation situations  
  • ELAS-m: High planning and cost certainty due to flexible installation location determination  
  • ELAS-h: High planning and cost certainty due to adaptability for use with different jack systems via adapters  
  • Modular design and connected as a digital system via CAN bus, allowing for easy replacement of measuring jacks in case of failure  
  • Patented system for compensating blind forces from the coach body, ensuring very high accuracy and reproducibility of measurement results  
  • Delivered as a fully calibrated and accredited measuring system in accordance with DIN 7500-1  
  • Measurement accuracy better than ±0.5%, ±0.1% available on request

 

The portable high-precision 4-point measuring system, ELAS-m, can easily be integrated into jack stands, or in the case of ELAS-h, into lifting jack systems. The integrated precision lift facility enables precise control of heights and forces, which is crucial for measuring low-torsion positions of coach bodies or determining the center of gravity. The integrated ELAS-data software supports the measuring process by continuously monitoring and comparing the measured and calculated corner forces. This software-assisted control significantly reduces operational errors. A visual notification is displayed to the user as soon as the desired low-torsion position is reached. This functionality makes the system particularly reliable and efficient in use, especially for critical tasks such as the geometric measurement of coach bodies.

The ELAS system was developed to meet market demands for cost-efficient alternatives to automatic test rigs. Additionally, the system features patented pendulum heads and plain bearings that ensure neutral force transmission and compensate for mechanical stresses in the vehicle, guaranteeing highly accurate and reproducible measurement results.

The modular design of the system allows for quick replacement of defective components, minimizing downtime and ensuring smooth operation of the measurement process. The system is delivered pre-calibrated, eliminating the need for time-consuming adjustments or on-site setup. Calibration, according to DIN 7500-1, is performed by an independent, accredited body, which is certified according to DIN EN ISO/IEC 17025.

    Mobile Measuring Device for Determining Corner Forces Type ELAS-m

    Mobile Measuring Device for Determining Corner Forces Type ELAS-m - Corner Force Measurement of a Rail Vehicl

    Mobile Measuring Device for Determining Corner Forces Type ELAS-h - Corner Force Measurement via Lifting Jack System

    Mobile Measuring Device for Determining Corner Forces Type ELAS-h - Measuring Device on Lifting Jack System

    1 / 4

    2 / 4

    3 / 4

    4 / 4

Automatic Corner Force Measuring System

At a Glance:

Patented system for compensating blind forces from the coach body, ensuring high accuracy and reproducibility of measurement results

Automatic or manual adjustment of the low-torsion position

Setting the low-torsion reference position for coach bodies

Complies with DIN 25043 (reference force method)

The ELAS-a corner force measuring system is a high-precision, stationary system used to determine and adjust low-torsion positions of coach bodies.

It is also used to calculate the center of gravity, shim thicknesses, and total weight. The system is employed in various phases of vehicle construction, such as bodywork, final assembly, as well as in retrofitting and repairs. The system complies with DIN 25043.

In Detail:

  • Stationary corner force measuring system for determining the low-torsion position and reference position of coach bodies.  
  • Complies with DIN 25043 (reference force method).  
  • Automatic or semi-automatic adjustment of the low-torsion position.  
  • Setting the low-torsion reference position.  
  • Calculation of the center of gravity and total mass of coach bodies and locomotives, as well as the required shim thickness.  
  • Ability to maintain the achieved position over a longer period, e.g., during subsequent geometric measurements.  
  • Setup within minutes, no special tools required.  
  • Integrated fall protection.  
  • Available as a jack or rolling support variant, allowing for versatile use in different installation situations.  
  • High planning and cost certainty due to flexible installation location determination.  
  • Patented system for compensating blind forces from the coach body, ensuring very high accuracy and reproducibility of measurement results.  
  • Easy to operate.  
  • Delivered as a fully calibrated and accredited measuring system in accordance with DIN 7500-1.  
  • Measurement accuracy better than ±0.5%, ±0.1% available on request. 

 

The system can be delivered as either a semi-automatic or fully automatic unit and allows for the convenient adjustment of the low-torsion position of the coach body through an advanced control concept, while the lifting or tilting of the coach body is achieved via lifting spindles. The innovative ELAS-data control software enables automatic data acquisition, evaluation, and control. The system is equipped with a precise height measurement system, patented pendulum heads, and plain bearings that ensure accurate measurement results even with slight inclinations.  

A version as a movable system on rails, known as rolling supports, is also available, as is a relocatable system on jack stands. A unique feature is the integrated support sleeve, which serves as fall protection for the coach body while also protecting the measuring head when retracted.  

Calibration is carried out by an independent accredited body in accordance with DIN 7500-1. This body is further accredited by the German Accreditation Body (DAkkS) in accordance with DIN EN ISO/IEC 17025.

    Stationary Measuring Device for Determining Corner Forces Type ELAS-a

    Stationary Measuring Device for Determining Corner Forces Type ELAS-a - Corner Force Measurement of a Rail Vehicle

    Stationary Measuring Device for Determining Corner Forces Type ELAS-a - Application Example

    Stationary Measuring Device for Determining Corner Forces Type ELAS-a - Corner Force Measurement of a Coach Body

    1 / 4

    2 / 4

    3 / 4

    4 / 4

Contact us

We are happy to assist you with any questions regarding wheel contact force measurement, corner force measurement, and bogie test rigs.

Technical Specifications ELAS-m and ELAS-h
ELAS-mELAS-h
BuildCompact measuring jack Compact measuring jack
Protection rating IP 54 IP 54
Storage temperature range -20 to +60 °C-20 to +60 °C
Nominal temperature range 0 to +40 °C 0 to +40 °C
Max. load / force per measuring jack 20.000 kg / 200 kN
30.000 kg / 300 kN
Higher on request
20.000 kg / 200 kN
30.000 kg / 300 kN
Higher on request
Min. load / force per measuring jack 10% of measuring load / measuring force 10% of measuring load / measuring force
Increments2 kg / 0,02 kN
More on request
2 kg / 0,02 kN
More on request
Measuring equipment class 0.5 under DIN 7500-1
0.1 on request
0.5 under DIN 7500-1
0.1 on request
Power supply 230 V / 50/60 Hz
Other supply voltages on request
230 V / 50/60 Hz
Other supply voltages on request
Data transfer Digital data busDigital data bus
InterfacesUSB, LAN, WLAN USB, LAN, WLAN
SoftwareELAS data ELAS data
Technical Specifications ELAS-a
ELAS-a
BuildJack or carrier truck
Protection rating IP 54
Storage temperature range -20 to +60 °C
Nominal temperature range 0 to +40 °C
Max. load / force per measuring jack 20.000 kg / 200 kN
35.000 kg / 350 kN
Higher on request
Min. load / force per measuring jack 10% of measuring load / measuring force
Increments2 kg / 0,02 kN
More on request
Measuring equipment class 0.5 under DIN 7500-1
0.1 on request
Power supply 380 V / 50/60 Hz
Other supply voltages on request
SoftwareELAS-data
Digitales Anzeigegerät für mobile Radaufstandskraftmesseinrichtung Typ WMV

WMV Measurement Data Controller / Software

The WMV measurement data controller is included in the delivery and serves as the link between the sensors and the measuring software. It receives the digitized sensor data and visualizes it in a logical interface for the user. Additionally, it allows certain commands to be executed via its touchscreen – for example, resetting the sensors to zero.

Häufig gestellte Fragen

Hier finden Sie Fragen, die Ihnen helfen, weitere Details über unseren Prozess und unsere Arbeitsweise zu verstehen.

Kontakt aufnehmen
  • How will you handle the work if we need to transport our vehicle to Germany?

    Before our measuring systems are handed over to the customer, they are tested by an independent accredited body (Materialprüfungsamt – materials testing office) After Step 1 is approved as conforming to the official international standard MPA-STAA12K17 (a specification of DIN 7500-1) and further standards, such as ASTM E4.This independent body is in turn accredited by the German national accreditation body (Deutsche Akkreditierungsstelle GmbH (DAkkS)) as conforming to DIN EN ISO/IEC 17025.v

  • How will you handle the work if we need to transport our vehicle to Germany?

    Before our measuring systems are handed over to the customer, they are tested by an independent accredited body (Materialprüfungsamt – materials testing office) After Step 1 is approved as conforming to the official international standard MPA-STAA12K17 (a specification of DIN 7500-1) and further standards, such as ASTM E4.This independent body is in turn accredited by the German national accreditation body (Deutsche Akkreditierungsstelle GmbH (DAkkS)) as conforming to DIN EN ISO/IEC 17025.v

  • How will you handle the work if we need to transport our vehicle to Germany?

    Before our measuring systems are handed over to the customer, they are tested by an independent accredited body (Materialprüfungsamt – materials testing office) After Step 1 is approved as conforming to the official international standard MPA-STAA12K17 (a specification of DIN 7500-1) and further standards, such as ASTM E4.This independent body is in turn accredited by the German national accreditation body (Deutsche Akkreditierungsstelle GmbH (DAkkS)) as conforming to DIN EN ISO/IEC 17025.v

Increase Your Derailment Safety.

Get advice from our experts on corner force measurement systems now!

CONTACT US